First and foremost, it is needful to know that the random orbital polisher or the dual polisher is a waxing, buffering, and car polishing device. Cars are not some sort of machines that have thick skins, such that you don’t need to worry about it fading or wearing out over time. Even humans at some point wear, and needed some little polishing to remain glowing and shining. So, your car also needs some polishing to maintain and glow. Then which car polisher is the best for your car and suitable for you. In this regard, we are going to review the random orbital polisher vs dual action.
Proper maintenance should be every car owner’s bone of contention: How do I fix my car?…how do I get this off?…how do I get this added?…is my car not getting old? What da Polisher should I get? and leading to how do I polish my car?? All these questions cannot but pop up in our heads, cause the car serves us where our legs could not. Hence, talks about car polishers are expected.
Table of Contents
What exactly are the random orbital polisher and dual action?
What is Random Orbital Polisher?
As earlier established, the random orbital polisher is a car polishing device; an orbiting device to be particular. The name ‘Orbital’ was coined from one of its qualities; moving in an orbit. Literary, an orbit is a circular flow of one object around another; likewise, the random orbital polisher has a backing plate that circularly extends its sphere of influence (rotating around its reach).
What is Dual action Polisher (DA)?
Similarly, the dual action, popularly known as DA, simply connotes double actions, indicating that the dual action is multipurpose. The dual action is no doubt, a polishing machine known for the combination of two motions; the circular motion and the spinning motion.
It is now obvious, that both the random orbital polisher and the dual action refers to a single device with two different names. The random orbital polisher has several names. All these names specifically explain its several unique features. Sequel to this, let’s take a stroll down to make clear what actually the difference is? Due to which people often confuse.
Difference between Random orbital polisher or dual action polishers
With the advancement in engineering and technology, The newest generation of random orbital polishers has more power than the old or first-generation DA polishers. However, some features which separate the Dual action machines with each other, are:
- Type or way of Dual action movement
- Backing plate min. and max. size
- Power or Wattage
- Shape
- Weight
- Speed Control
- Speed of rotation
Let’s now discuss these differences in detail which will help you in choosing the right car polisher of your choice.
Why choose the Random Orbital Polisher or Dual Action (DA)
Choosing a machine depends on how much you get to love its operations and results. Here are some outstanding benefits that make the random orbital polisher extremely amazing.
Dual Action Movement
Unlike a rotary polisher, whose mode of swinging is known to be just uni-directional. This dual action movement is one of the DA’s most distinguishing features from other polishing machines. Its ability to move orbitally and create a dual operations makes it a more effective and time-saving type. This particular feature proves to be more useful when you have the plight to cut, reduce heat and also add a little power, all at the same time.
Did you get to think about why it’s being called random?
It is because the spinning is managed by an uninterrupted floating spindle. Whose movement is prone to alterations if and only if a reasonable level of pressure is added to it. Since the machine is wired to float freely, pressing it down to the surface or adding pressure to it might produce heat, which possibly may get the car surface burnt.
Free and Forced Dual Action Movement
This dual action can be forced or free. Forced dual action rotation movement requires adding little force/pressure to the device, perhaps to remove glued stains off the surface. While the free dual action rotation movement depicts that pressure/force is absent, leaving the device to rotate and function on its own. This system disallows for much heat and, hence, prevents the surface from getting burnt or charred.
Speed control
The random orbital polisher or the dual action has a fast work rate; although speedy but regulated. Alongside the time efficiency, this speed ability might eventually become a big challenge if the machine falls in the hand of a novice or amateur. As a result, it takes expatriates to handle this seeming beneficial side of the DA movement.
Handling convenience and working beneath the coat
The dual action is laced with a rubber handle, which speaks for convenience and easy handling. So whenever, you apply the right car wax to remove scratches and make it shiny. Most people use this polisher to handle safely. Hence the safety mechanism is the appealing parameter for the beginners. So it is the best-suited car polisher for beginners.
Features of the Random Orbital Polisher or Dual action Polisher
- Size backing plate
- A powerful amplifier of 7.8amp and large output ranging between 0-780.
- Electronic controller: this helps to regulate the speed constantly, whether under load or low power
- Air vent: to release out heat, to prevent burnt or char.
- Ergonomically designed handle: for precision and better performance while handling.
- Double insulated cord
How This Misconception was made Clear?
Making research and digging deep down on this has led me to stumble on a whole lot of misconceptions about this actual point of address. Several researchers laid several attempts to fish out the real connection or differences, better still, uniqueness that exist between the spoken about and generally hammered random orbital polisher and the dual action.
Furthermore, a whole lot of problems played out and influenced the likely explanations given to this machine in general. A holistic approach brought me to the realization that people tend to name it after the approach through which the machine attended to their various respective problems.
Some came up with the idea that the dual action should be called ‘dual motion’ instead. Because it’s multi operations can seemingly be addressed as motions, ranging from serious removal operation and little polishing vis-à-vis new clear coat. Nonetheless, most of these notions are attached to the low experience level of the detailer, poor knowledge of what is and more importantly, aside and inaccurate view of the machine itself.
Conclusion on Random Orbital Polisher vs Dual action
Interestingly, this machine is a great one; a deviation from the normal older manually regulated car polisher. The random orbital polisher’s buffer is called the dual action car buffer. Though it doesn’t mean both are separate entities. The random orbital polisher and the dual action are used interchangeably, all depending on the function intended to be addressed.
Reviewing their uniqueness; when taking a glance at its free-spinning mode, it’s preferably called the random orbital polisher.
Now, when it’s been viewed based on its double operations and multipurpose actions, it is more likely to be called the dual action.
In conclusion, it is an aberration to address the random orbital polisher and dual action as a separate entity, notwithstanding the functions embedded in the polishing machine.
